Pourquoi la brique à haute teneur en alumine a-t-elle du noir et du blanc, Coeur noir, et fissures réticulées?

Pourquoi le cœur noir de la brique à haute teneur en alumine?

Après des années de développement, la quantité de produits à haute teneur en alumine sur le marché des fours a considérablement augmenté ces dernières années, et la maçonnerie des parties importantes du four doivent toutes utiliser des briques à haute teneur en alumine. Cependant, avec la variété croissante de produits à haute teneur en alumine et de plus en plus de R&Unités D, les exigences (index techniques) pour les produits à haute teneur en alumine, les prix sont également de plus en plus élevés.
Teneur élevée en Al2O3, faible porosité apparente, point de ramollissement sous charge élevée, petit taux de changement refired, petit taux de fluage, et qualité d'apparence stricte, etc. Cependant, dans la production de produits à haute teneur en alumine avec AL2O3, contenu supérieur à 60%, le problème du centre noir survient souvent après la cuisson à haute température de billettes simples. Quand le problème est grave, son cœur noir pénétrera dans le corps de brique, entraînant une réduction de la qualité du produit, qui ne peut pas être utilisé et d'autres situations. High alumina black heart brick products not only affect the appearance of quality but importantly, various physical and chemical indicators of different degrees of reduction.
High alumina brick black heart introduction: the black heart is a phenomenon that occurs in the production process of high alumina brick. The color of the back of the produced high alumina brick gradually changes, from the outer layer of yellow-green to the inner slowly becoming gray-black. If it is calcined again in an oxidizing environment, the black heart part will become white again.

Why does The Black and White Color of High Alumina Brick Appear?

The main reason why high alumina bricks appear black and white color is because of high temperature and reduced gas 6 atmosphere. So that the iron and titanium ion reduction coloring, at a lower temperature let the low iron and titanium ion re-oxidation and decolorization.
Another thing is that the high alumina brick is located too close to the firebox near the kiln, resulting in a high temperature of the hot air causing oxygen-rich operation and avoiding reducing atmosphere. Dans le processus de refroidissement, slow cooling, so that the low iron and titanium ions re-oxidation and decolorization. So reminding refractory manufacturers in the process of production to pay special attention to these issues are important reason affecting the appearance of high alumina refractory brick quality.

High Alumina Bricks Produce Net Cracking Causes and Treatment Methods

The production of high alumina bricks often appears to be defects, and mesh cracking generated by the reasons is more complex. The impurity content of clinker (especially R2O content), the degree of sintering, the critical particle size, the number of fines added, the mixing quality of the clay, the humidity and temperature of the billet drying medium. The shrinkage occurring in the billet during the sintering process and the secondary palletization reaction and the recrystallization effect of corundum can all lead to reticulation on the surface of high alumina bricks.
The sintering of high alumina bricks is liquid phase sintering, and the formation temperature and amount of liquid phase, the heating rate, and atmosphere conditions during sintering are also important factors that lead to inconsistent shrinkage, resulting in surface reticulation cracks.
Le degré de frittage, l'atmosphère de frittage et les substances volatiles présentes dans la phase gazeuse ont une grande influence sur la fissuration par réticulation superficielle des briques à haute teneur en alumine.. Le clinker mal fritté continue de rétrécir pendant le processus de frittage des briques à haute teneur en alumine, provoquant des fissures et des faïences dans les briques à haute teneur en alumine.

Aussi, la mulitisation secondaire en clinker mal fritté n'est pas suffisante. La mulitisation secondaire du clinker lui-même se poursuit lors de la cuisson de la brique à haute teneur en alumine, qui est un facteur intrinsèque provoquant le retrait incohérent de la brique à haute teneur en alumine. Cela entraîne une augmentation du nombre de fissures réticulaires et du degré de fissuration de la brique à haute teneur en alumine..
The degree of reticular cracking on the surface of the high alumina brick is also closely related to the water absorption rate of the clinker used. The greater the water absorption of the clinker, the greater the degree of cracking of the mesh. When the clinker with water absorption rate reaches the brick, high alumina brick in the sintering process clinker itself continues to complete the sintering process, high alumina brick shrinkage is larger and uneven, and thus prone to cracking and mesh.
en plus, the kiln firing atmosphere is also one of the reasons why the high alumina brick produces net cracking. When firing high alumina bricks, the kiln atmosphere needs to be weak oxidation flame, excess air coefficient control in practice shows that the high alumina brick surface network cracks tend to increase the excess air coefficient and reduce. But the air excess coefficient fluctuations should not be too large.
en plus, high alumina refractory brick surface network cracks are mostly produced on the brick surface within the yard brick gap. Par conséquent, it can be inferred that when the excess air coefficient in the kiln is small, or when a reducing atmosphere is produced. CO is easily retained in these places due to the small brick seam, thus reducing Fe2O3 in the high alumina brick to FeO. The surface of the refractory brick facing the channel, the airflow is relatively smooth, so it will not be affected by the change in atmosphere, and no network cracks are produced. It is particularly important to note that frequent changes like the combustion atmosphere should be avoided as much as possible during firing. Because the effect of such alternating changes will cause damage to the surface.
The chemical analysis of the surface and the central part of the high alumina brick with more surface network cracks can be seen: the Al2O3 on the surface of the high alumina refractory brick body is 1%-2% higher than the central part, while the SiO2 is 1-2% lower and the NaOb is more than 10 times higher than the center.
From the physical phase analysis, it can be seen that the mullite content of the surface skin is 12% lower than the central part, the corundum content is 4%-5% higher, and the glass phase content is 7%-8% higher. This indicates that during the migration of Na2O, Na+ volatilizes and adsorbs on the surface of the high alumina brick, which will promote to make the mullite decomposition. So that the mullite on the surface of the high alumina brick decreases and the corundum and glass phases increase. Due to the increase and early appearance of the amount of liquid phase on the surface, the brick surface shrinks prematurely, leading to the generation of the net pattern.
Practice shows that to avoid and reduce the network crack generation, the water absorption of 1 and 2-grade high alumina clinker should be controlled below 4%-5% respectively. And the water absorption of barrel mill powder should also be controlled below 6%, and the excess air coefficient should be controlled between 1.1-1.2 as appropriate. Et la cuisson des briques à haute teneur en alumine doit être effectuée dans une atmosphère stable et faiblement oxydante grâce à un ajustement thermique..

Présentation PER, meilleure entreprise de fabrication de briques réfractaires, où la qualité rencontre l'innovation. Avec des décennies d'expérience, nous fournissons à nos clients les meilleures briques réfractaires pour leurs applications à haute température.
Notre usine de fabrication de pointe utilise une technologie de pointe et les meilleures matières premières pour produire des briques réfractaires d'une durabilité inégalée., force, et performances.
Notre équipe de professionnels qualifiés est fière de fournir des produits de qualité supérieure adaptés à un large éventail d'industries., de la sidérurgie à la pétrochimie, et au-delà.
Nous croyons qu'il est important de fournir à nos clients un service exceptionnel, livraison à temps, and cost-effective solutions that meet their unique requirements.
Trust us to be your reliable partner in refractory solutions, and let us exceed your expectations with our unparalleled products and services.