정보

유리 가마에서 실리카 벽돌의 차이점은 무엇입니까, 열풍로 및 코크스 오븐

Silicon Bricks for Glass Kilns

Silicon bricks are widely used in glass kilns, 그리고 그들의 주성분은 이산화 규소입니다. (SiO2). Silica bricks used in glass kilns require SiO2 content above 94%, high use temperature between 1600~1650℃, and density between 8~95g/cm3.
The porosity requirement is less than 22%, the larger the porosity, the worse the quality of the silicon brick.
The appearance of silica brick is mostly white crystal, the microscopic composition of scale quartz crystal because the silica brick at high temperatures will occur crystal transformation, and volume expansion, especially at 180 ~ 270 ℃ and 573 ℃, crystal transformation is more intense.
그러므로, the baking kiln and cold repair process should adapt to the crystal transformation of silicon firebrick, such as loosening and tightening the pulling strip. The silica brick masonry should be left with expansion joints.

The working temperature of silica brick in a glass kiln is about 200℃ higher than that of clay brick.
하지만, because of the poor erosion resistance of glass liquid and alkaline flying material.
It is used for constructing large abrasive wheels, chest walls and small furnaces, and other structures.
When constructing, bonding materials are made with substances close to the composition of silica bricks such as high-silica refractory clay and silica brick powder.
The composition of silica bricks (승) is 45% 사각 석영, 50% scaled quartz, 1% 에게 2% 유리상, a small amount of residual quartz, and a fusion index (2R2O + Al2O3) <0.5%.
After the glass kiln adopts oxyfuel technology, the life of silica bricks is drastically reduced from 5~10 years to 2~3 years.

Lattice Silica Bricks for Hot Blast Furnace

Changes in the denseness and phase composition of refractory bricks affect their quality and heat capacity.
After the use of a hot blast furnace, the test results of lattice silica bricks show that.
1. The porosity of lattice silica bricks is 18%, bulk density is 88%, Al2O3 content increases to 2.83% (mass fraction), CaO content is the level of the original refractory bricks (43% (mass fraction), other impurities content is very low.
2. Except for the transformation of the silica brick skin from squamous quartz to square quartz, the rest of the brick consisted of squamous quartz and a small amount of silicate.
3. No distortion of lattice silica brick was found after use, such as distortion, which shows that the quality and heat capacity of lattice silica brick in a hot air furnace will not change significantly. 그러므로, it is presumed that the heat capacity of lattice silicon brick will not be reduced.

Performance Characteristics of Hot Blast Furnace Silica Bricks

Silicon bricks for hot blast furnaces are silicon refractory products with scaled quartz as the main crystalline phase, which is used in the high-temperature part of the blast furnace. Hot blast furnace silicon bricks should have the following characteristics.
1. Stable volume and low creep rate at high temperature under long-term high temperature and load conditions.
2. 600 degrees above the thermal shock resistance, can adapt to the hot blast furnace temperature changes, to maintain the integrity of the brickwork.
3. Good chemical resistance.
4. Large thermal conductivity.
According to the metallurgical standard (YB/T133-1998), the silicon brick for a hot blast furnace is designated as RG-95, which is divided into the roof, wall brick, and lattice brick according to the usage.

Coke Oven Silica Bricks

Silica bricks for coke ovens are silica refractory products used for building coke ovens with scaled quartz as the main crystalline phase.
Modern coke ovens are large thermal equipment made of tens of thousands of tons and nearly a thousand types of brick refractories, of which silica bricks account for 60% 에게 70% of the usage.
It is used to build coke oven heat storage chamber walls, ramps, combustion chambers, charring chambers, 지붕, 등.
Traditional coke oven silica bricks have good chemical stability.
If we can keep the anisotropic performance of traditional coke oven silica bricks and improve the thermal conductivity, we can ensure the unity of structure and stability of the material.
그러므로, high thermal conductivity silica brick is a product that meets the requirements of coke oven development.

Coke oven silicon brick should have the following characteristics.
1. High Load Softening Temperature
Coke oven silica bricks should bear the dynamic load of a coal loading car at the top of the furnace at high temperature, and require long-term use without deformation, so a high load softening temperature is required.
2. High Thermal Conductivity
Coke is made from coking coal heated by conduction in the charring chamber through the walls of the combustion chamber, so the silica bricks used to build the walls of the combustion chamber should have high thermal conductivity.
3. 우수한 열충격 저항
As the coke oven should be loaded with coal and coke regularly, the temperature of the silicon bricks on both sides of the combustion chamber walls should change drastically, so the coke oven silicon bricks should have good thermal shock resistance.

Coke oven silica bricks have high SiO2 content, 높은 압축 강도, 높은 부하 연화 온도, low residual should-time content, 그리고 좋은 내마모성.
After testing and identification, the main performance index of the product has passed and reached the standards of Japan SC, Germany DIN, and Japan MS.
The product is characterized by high purity, 고강도, wear resistance and denseness, high thermal shock stability, volume stability, and low creep after use. The product is widely used in 4.3m coke ovens, 5.5m coke ovens, 6m coke ovens, and 7m coke ovens.

요약

전반적인, while silica bricks used in glass kilns, 열기로, and coke ovens share some similarities in terms of their composition and manufacturing, there are also some important differences in the way they are designed and used in each application.

xla2l

Recent Posts

기니의 "Black Swan Event"로 인해 알루미나 가격이 상승함

10월부터, 알루미나 가격은 지속적으로 상승, and China's largest bauxite importer - a…

2 months ago

고알루미나 벽돌: 고온 부문의 견고한 수호자

첫 번째, 고알루미나 벽돌: The Leader In High Temperature Refractories As a leader in high-temperature…

2 months ago

시멘트 로터리 가마 내 내화 벽돌의 손상 및 수리

The application of refractory bricks in the kiln immediately endangers the operation rate of the…

1 year ago

터널 가마 건설의 일반적인 품질 문제는 무엇입니까?

Analysis Of The Causes Of Common Quality Problems In Tunnel Kiln Construction And Measures To…

1 year ago

커런덤 내화물 캐스터블은 무엇으로 만들어졌나요??

Corundum quality refractory castables are made from corundum to the new jade refractory insulation material…

1 year ago

알루미늄-실리콘 내화 원료 최근 개발

알루미늄-실리콘 내화 원료 분석 교수. Li Yong of the University of Science and…

1 year ago