Галд тэсвэртэй тоосгоны түүхий эдийг хурдан бөгөөд үнэн зөв тодорхойлох

Accurate Identification Of The Raw Materials Of Refractory Bricks

The different compositions of refractory bricks can be divided into five categories, тухайлбал: цахиур-хөнгөн цагаан хайлш шүлтлэг цувралын галд тэсвэртэй тоосго, галд тэсвэртэй тоосго, нүүрстөрөгчийн тоосго, цирконы галд тэсвэртэй тоосго, and heat insulation bricks. Alumina refractory bricks are the first. Silicon bricks are the first acid-resistant refractory bricks.

For coke oven construction first, but for various glass, керамик, carbon furnace, refractory brick vaults and other bearing parts of the bearing furnace, hot air furnace temperature high parts of the use, but should not be less than 600 ℃ and temperature fluctuations of heat equipment.

Шавар тоосго, it is a blast furnace, халуун тэсэлгээний зуух, халаалтын зуух, бойлер, lime kiln, rotary kiln ceramic refractory bricks.

Өндөр хөнгөн цагааны исэлд тэсвэртэй тоосго, high alumina refractory materials are composed of corundum, муллит, болон шилэн фаз. The raw materials are natural ores of bauxite and silicate, as well as fused alumina, sintered alumina, mullite composition, and clinker of alumina and clay calcination. It is produced by sintering. Гэсэн хэдий ч, the commodity is also available as fused bricks, molten bricks, тоосго, and amorphous bricks. Өндөр хөнгөн цагааны исэлд тэсвэртэй тоосго нь гангийн үйлдвэрлэлд өргөн хэрэглэгддэг, өнгөт металлын үйлдвэр, болон бусад үйлдвэрүүд.

Corundum refractory brick, which is a kind of refractory brick with corundum as the first object, can be divided into sintered corundum brick, and electrofused corundum brick.

With the continuous development of the cement industry, the requirements for refractory materials have also been put forward higher. Refractory bricks are popular because of their high-temperature resistance. Тэгэхээр, how do friends know the quality of refractory bricks?

The refractory brick quality inspection method is usually hammer smash brick base, listening to their sound is determined, when a dull sound “, also confirmed the refractory material internal open space or level, this brick is not suitable for processing. When the sound is balanced. Confirmation of the internal structure of the brick is better. Suitable for processing; when the sound is very clear, close to the metallic sound. It is proven that the internal sintering of refractory bricks is high and the process is difficult. It has a high density, good detail, өндөр хүч чадал, and high thermal conductivity per unit volume component.

Refractory bricks have the following characteristics: химийн найрлага: the main components to determine the quality and performance of refractory materials; шахалтын бат бэх: the ability to accept the maximum pressure (room temperature); дулааны цохилтын эсэргүүцэл: the ability to resist temperature changes without being destroyed. Flexural strength: the ability to accept shear pressure. Load softening temperature: also known as high-temperature load deformation temperature threshold, this parameter is very important to symbolize the high-temperature resistance of the material.

Тэгэхээр, is insulation brick good or refractory brick good

1. Thermal insulation performance
Refractory brick thermal conductivity is 1.0 (дундаж температур 350 ± 25 ℃) w / Дээрх m.k, while the thermal conductivity of insulation brick is generally in 0.2-0.4 (дундаж температур 350 ± 25 ℃) w / м.к. This can be concluded that the insulation performance of the insulation brick than refractory brick insulation performance is much better.
2. Галд тэсвэртэй материал
The refractories of refractory bricks are above 1400 градус, while the refractories of insulation bricks is mainly below 1400 градус.
3. Нягт
The density of refractory bricks is basically above 2.0g/cm³, while insulation bricks are mostly light insulation materials, and density is generally 0.8-1.0g/cm³.

Цогц, refractory bricks have high mechanical strength, үйлчилгээний урт хугацаа, сайн химийн тогтвортой байдал, материалтай химийн урвал байхгүй, мөн өндөр температурт сайн тэсвэртэй, хамгийн өндөр халуунд тэсвэртэй температурт хүрч болно 1800 ℃. Энэ нь ялангуяа өндөр ба бага температурт хувиргах зууханд хэрэглэхэд тохиромжтой, хувиргах зуухнууд, устөрөгчийн хувиргагч, хүхэргүйжүүлэх савнууд, and methanation furnaces in fertilizer plants, and also in hot air furnaces and heating conversion equipment in the steel industry.

Refractory brick has the advantages of high density, өндөр хүч чадал, элэгдэлд тэсвэртэй, good corrosion resistance, small coefficient of thermal expansion, high grinding efficiency, low noise, үйлчилгээний урт хугацаа, and non-staining materials. It is a high-quality grinding medium adapted to various grinding machines.

Insulation brick has heat preservation and insulation: effectively reducing energy consumption. Fireproof: reach the national standard A grade. Clean, environmental protection: will not cause secondary pollution of the air. Light weight: each square meter only weighs about 1.4 кг, reducing the load of the building. Simple production: completely break through the traditional process, and greatly shorten the construction cycle. Aesthetic: adjustable to various colors, suitable for open installation. Durable: үйлчилгээний урт хугацаа. 7 major advantages.

Галд тэсвэртэй тоосго, дулаалгын тоосго маш их ялгаатай, their use environment, хамрах хүрээ, болон үүрэг нь ялгаатай. Өөр өөр байршилд өөр өөр материал ашиглах болно, материал худалдан авахдаа, we have to decide which refractory material is suitable for their use according to their actual situation.